Signage in Kent Town & Adelaide

Gigantic Signs' workshop is in Kent Town, minutes east of the Adelaide CBD. Design, fabrication and installation all happen here under one roof, so an Adelaide business can walk in, talk to the people making the sign, and have it built, printed and fitted by a local team rather than shipped in from interstate.

We have been making signs for Adelaide businesses for over 30 years, and Kent Town has been home base for a long stretch of that. Being on the inner-east fringe of the city means we are a short drive from most of our customers, whether that is a shopfront on Rundle Street, an office tower in the CBD, or a warehouse out towards Port Adelaide. If you want to see what we do, our Online Store and instant quote tool are the quickest way in.

A working sign workshop in Kent Town

Kent Town is not a showroom with the real work done somewhere else. It is a working workshop, and the whole sign gets made on site. That matters because the person who quotes your job is usually the same person who cuts, prints or builds it. Here is what actually happens in the building:

• Routing and fabrication -- acrylic, aluminium and composite panels are cut, shaped and assembled here, from a single reception logo to a full set of building letters.
• Large-format printing -- banners, corflute, vinyl wraps and window graphics are printed and laminated on site, so colour and finish are checked by hand before anything leaves.
• Illuminated sign build -- light boxes and LED faces are assembled and tested in the workshop, then loaded for installation by our own team.
• Finishing and fit-off -- powder-coated frames, mounted panels and packed vehicle kits are prepped for install before the van heads out.

Serving the CBD and inner east

Because Kent Town sits right on the edge of the city, most Adelaide jobs are a short trip for us. Over the years we have done a lot of work across the CBD and the inner-east strips, and being close by is often the difference between a fast fix and a long wait.

A jeweller in the Rundle Mall precinct came to us with an illuminated shopfront light box that had gone dim and patchy across the face. Because the workshop was minutes away, we could get in, diagnose the failed lighting, rebuild the box and have it back to an even glow inside a week. If your own sign is looking uneven, we explain the common causes in why an illuminated sign goes dim or uneven.

The same closeness helps with fit-outs. We have signed CBD and fringe premises for a dental practice and a wellness studio, handling reception logos, window graphics and directional signage as part of the one job. When a fit-out timeline moves, being local means we can send someone across to re-measure or adjust on the day rather than rebooking a week out. Full shopfront work is covered in our guide to what shopfront signage costs in Adelaide.

It is not only the city. A national logistics operator's warehouse out towards Port Adelaide needed a full compliance and safety fit-out, and our team could run the site walk-through, build the signs in Kent Town and install them without any interstate freight in the loop. That range is set out in safety signage for Adelaide workplaces.

Why local fabrication matters

Plenty of signs sold in Adelaide are made elsewhere and trucked in. That is fine until something needs a second look. When the sign is designed, built and installed by the same Kent Town team, a few things get easier:

• Site visits are quick -- we can come and measure your shopfront or wall in person, so the sign fits the space the first time instead of guessing off a photo.
• Re-fits and repairs are fast -- if a panel needs adjusting or a light fails, the workshop is minutes away, not a freight run interstate.
• One-day fixes are possible -- for straightforward faults we can often turn a job around the same week, because the making and the fixing happen in the one place.
• No interstate freight -- nothing waits on a truck from another state, which cuts both the delay and the risk of a large sign arriving damaged.

Visit us in Kent Town

If you are nearby, the easiest thing is to talk to us directly. You can call the Kent Town team on (08) 8362 5455 or email [email protected] to talk through a project, book a site visit, or ask about a repair. You can also price a standard sign yourself in a couple of minutes with our instant quote tool, or browse the range in the Online Store before you get in touch.

Frequently asked questions

Where is Gigantic Signs based?

Our workshop is in Kent Town, on the inner-east fringe of Adelaide and minutes from the CBD. Design, fabrication and installation all happen at that one site.

Do you install signs across Adelaide?

Yes. Our own team installs across the CBD, the inner east and greater Adelaide, from shopfronts and offices through to warehouses out towards Port Adelaide.

Can I visit the workshop?

Get in touch first on (08) 8362 5455 or [email protected] so we can make sure the right person is on hand to talk through your job.

Talk to your local Kent Town sign team

Being local is the whole point. When your sign is made minutes from your door, quotes are faster, fixes are faster, and there is a real workshop you can call. Price your job on our quote tool, browse the Online Store, or get in touch with the Kent Town team. Thirty years on, we still build them right here, and we build them GIGANTIC.