Real Estate Signs Adelaide

The short answer: for most Adelaide agents, real estate signs come down to corflute signboards in plastic frames for fenced listings, ground-spike signs for vacant blocks, small A-frames for open-home directions, and premium Evarite panels for prestige homes. Gigantic Signs prints all four in Adelaide, so you can price and reorder each listing instantly instead of emailing for a quote.

We've been printing real estate signs in Adelaide for over 30 years, and every board leaves our Kent Town facility ready to go straight onto a fence or a spike. That means we know exactly what survives a fortnight of Adelaide sun, wind and the odd downpour, and what fades or flaps loose before your first open. If you want the bigger picture on weatherproof panels, posts and frames, our outdoor signage range covers the lot. But for agents, it comes down to matching the right board to the right listing.

The four real estate board types, and when each one suits

Not every listing wants the same sign. Here's how the four workhorses stack up so you can choose in seconds:

• Plastic-frame corflute signs -- the everyday hero, usually a 1200x900mm or 900x600mm printed corflute panel that slots into a rigid plastic frame and zip-ties straight onto the front fence. Cheap enough to run one per listing, sharp enough to look professional, and quick to swap. This is your default for-sale board across most suburban Adelaide streets.
• Ground-spike signs -- for the property with no fence to hang off. The corflute mounts to a spike (or timber stake) you drive straight into the front lawn or verge, so vacant blocks, new builds and set-back homes still get a proper board out front.
• Small A-frames -- the traffic-director, typically a 600x900mm double-sided board. Lightweight, foldable and portable, these sit on the footpath on open-home day pointing buyers around the corner or up the driveway, then fold flat into the boot when you're done.
• Evarite (premium) signs -- when the listing needs to look a cut above. Evarite is a rigid, high-finish panel that holds colour beautifully and reads as premium from the kerb. Ideal for prestige homes, waterfront and hills properties, or any campaign where the board is part of the pitch.

For-sale, for-lease, auction or open-home: match the message

The board type is only half the job. The wording and the moment it's on the fence matter just as much:

• For-sale -- the long-runner. It's on the fence for the whole 6-8 week campaign, so durability and clean branding carry the load. A 1200x900mm corflute in a plastic frame is the standard call.
• For-lease -- often smaller and quicker to turn over. Same corflute build, different message, and you'll usually want a batch you can put up and pull down fast between tenants.
• Auction -- high-stakes and deadline-driven. This is where an Evarite panel or a bold, clean corflute earns its keep, with the auction date front and centre so it reads from a moving car.
• Open-home -- all about the day itself. A-frames and spike signs do the directing, working with your main board to funnel buyers from the main road to the front door.

Brand consistency and Adelaide-weather durability

Every board out front is an ad for your agency, not just the property. When your colours, logo and layout are locked in across every corflute, spike and A-frame, a street of your listings reads as one confident brand, and that recognition is worth more than any single sign. Set your template once and every reorder comes back the same.

Durability is the other half. An Adelaide sign has to hold colour and stay square through a typical 6-8 week sales campaign, and that's where the build matters:

• UV-stable printing -- colours that don't wash out after a fortnight of summer sun on a north-facing fence.
• Weatherproof corflute -- sheds rain and shrugs off the wind that funnels down our exposed streets.
• Solid frames and spikes -- so the board stays square and upright right through the campaign instead of sagging or flapping loose.

The reorder shortcut: price and order each listing instantly

Here's the bit that saves agents real time. If you're listing every week, the last thing you want is to email for a quote and wait every single time. So we've put the ordering online, board by board, with your specs ready to go:

• Plastic-frame corflute -- jump straight to the real estate frames calculator, set your quantity and price it on the spot.
• Ground-spike signs -- the ground spikes calculator handles your vacant-block and no-fence listings the same way.
• Evarite premium panels -- price the prestige option through the Evarite calculator whenever a listing warrants it.

Set your artwork once, then every new listing is a 60-second reorder instead of a back-and-forth. As a rough guide, corflute signboards typically run in the range of $25-$70 each depending on size, with premium Evarite panels sitting higher again, and volume brings the per-board price down, so ask us about a standing agency rate. You can also browse and self-serve reorder your saved boards any time through our Online Store, so a repeat agent never has to start a quote from scratch.

One Adelaide agency's weekend problem, solved

An Adelaide property agency running multiple weekend open-homes came to us frustrated: every Friday was a scramble of emails to get enough boards printed, and half the time the branding drifted between batches. We locked their agency template into a single approved artwork, then set them up to reorder corflute frames, spikes and A-frames straight from their own calculators. Now they price and place an order for each new listing in under a minute, the boards come back identical every time, and Friday afternoon is no longer a panic. Same brand, every street, every week.

Frequently asked questions

What size are real estate signs in Australia?

The standard for-sale corflute board in Australia is 1200x900mm, with a smaller 900x600mm option for tighter fences and for-lease listings. Open-home A-frames are usually 600x900mm. Gigantic Signs prints all three sizes in Adelaide so your boards stay consistent from the main road to the front door.

How much do real estate signboards cost?

As a guide, corflute real estate signboards typically fall in the $25-$70 range each depending on size, while premium Evarite panels sit higher again. Volume ordering lowers the per-board price, and Adelaide agents on a standing agency rate reorder each listing through their own online calculators rather than requesting a fresh quote.

How long do corflute real estate signs last outdoors?

Comfortably through a full sales campaign of several weeks of Adelaide weather. Our corflute is UV-stable and weatherproof, so colours stay sharp from the first open to settlement.

Can you match our agency branding exactly?

Yes. We set your colours, logo and layout as a locked template, so every board and every reorder comes back brand-consistent without you re-checking artwork each time.

Do I have to email for a quote every time?

No, that's the whole point of the online calculators. Price and order each listing's boards instantly, then reorder in seconds for the next property.

Which board should I use for a property with no front fence?

Go with ground-spike signs. The corflute mounts to a spike you drive into the lawn or verge, so vacant blocks and set-back homes still get a proper board out front.

Ready to sort your listing boards?

Pick your board and price it instantly, or if you'd rather set up a standing agency rate and locked-in template, talk to our Kent Town team. Thirty years on, every real estate sign we print still has to earn its place on an Adelaide fence, and that's exactly why agents keep reordering from GIGANTIC.